Getting My hodgdon hybrid 100v To Work

Getting My hodgdon hybrid 100v To Work

Blog Article

I haven't shot for precision still, but I with any luck , will this weekend. It is actually imagined to be to some degree temperature delicate while. Not as lousy as H414, but no exactly where close to as stable as H4350, etcetera.

then i just tried some hybrid 100v considering the fact that its loaded during the 280 rem and the pressures were low with superior velocity so I assumed I'd strart small and see what happened.

As to the temperature stability i realize it isn't an Serious powder and I've seen some temperment. When shooting the 6mm ackley at 10 levels i was capable of use 47 grains with just a hint of pressure but when i was able to shoot them at sixty five levels the force was away from hand with incredibly tough bolt raise and flat cratered primers.

The 410 shotshell has extended been challenging to load due to shortcomings in powder fit, metering, and burning qualities, but now not. Lil’ Gun was made to suit, meter and conduct flawlessly during the 410-bore. No far more spilled shot or bulged conditions.

I needed to use an Excessive powder for the temp sensitive but i just am not getting the velocity with them as I'm With all the hybrid 100v.

So far as I'm able to inform I was two grains beneath max, but without proof that there was something wrong Together with the weapon, I have hybrid 100v responsible operator error.

I needed to use an Excessive powder for the temp sensitive but i just am not obtaining the velocity with them as i am With all the hybrid 100v.

Monitoring figures are despatched Once your purchase ships. In the event you have not hybrid 100v powder received a single inside of 4 small business days of inserting your order, Get hold of us at assistance@armorally.com.

I will probably just perform up a load from the max load for that 280 rem, like get started at 51gr and move up in .5gr increments using a 168gr VLD. let me determine what you're thinking that! factors i is going to be applying are as follows:

We bought several 8# jugs, but haven't tried using it out on any of our cartridges. Figured which could utilize it like a again up for H4350 and examination with other rifles. This thread sounds promising!

You need to do recognize that the 243 is incredibly recognized to get wild and unexplained stress excursions, especially with heavy bullets, You should not you?

Just take into account that it doesn't matter what caliber you shoot at whatsoever velocity it is the bullet begins slowing down the precise immediate that it leaves the barrel. Heck - if I could I might set my chrony out at one hundred-two hundred yds and really get very good data - but that is not practicle for many causes.

Just go hybrid 100v powder right into a ballistic calculator and Perform Together with the velocity until you receive whatsoever fps your chrony is acquiring at the space you set it at and think about the muzzle velocity at position 0 yds.

But with any above bore cartridges like this one particular, I noticed retumbo actually generate 100fps quicker in this gun. I just haven't preferred to change to retumbo because I've 8 lbs on the 100V. no have to re-invent the wheel when I have a very good load now. +one for westcliff publish. I've a 7mm mag and retumbo is the greatest I have discovered for one of the most velocity. I and I know its not easy to come by at the moment too.